icetro A25B15O, Руководство пользователя, Страница: 23 / 28

23
● Wash the ice scoop regularly. Wash it with other food containers.
● The handle of the ice scoop can be easily exposed to germs by hands and so forth.
Caution
● The detergent may cause burns.
● If you accidentally drink the detergent, do not force yourself to vomit.
● Instead, drink large amount of water or milk and contact your doctor immediately.
● If the detergent gets on the skin, wash with water.
Warning ● Keep the detergent out of children
’
s reach.
① Cubic Type: If necessary, remove the top cover and disassemble the evaporator cover, water curtain
(piano keys shaped part - for some products, it is necessary to remove the screws
on the front side), ice guide(the part that guides ice to slip into the tank), and nozzle frame
(the part to which the water spraying nozzle is attached).
② Vertical Type: If necessary, remove the top cover and disassemble the water curtain (the cover
that prevents water splash on the front side - push to the right completely to pull out
the trapping on the leftside to disassemble). The thickness sensor and water supply
pipe do not need to be disassembled.
Step 4: Put all components in a 1 liter (3 liters for cubic type) of the detergent/water mixture and rinse with
a soft nylon brush. Disassemble the spray bar (remove the left and right silicone plugs) and separate
the nozzles and inserts and immerse for 5 minutes (cubic type). Particularly, if too much lime has built up,
immerse in the solution for 15 to 20 minutes. It would help if you shake the components from time to time
and use lukewarm water. For cubic type, use a toothbrush to clean the nozzle area. When the cleaning
is complete, rinse all parts with clean water.
Step 5: While immersing the components in the cleaning solution, clean the inside of the ice container
with a soft brush. Rinse every corner of the inside door, door rails, reservoir, and evaporator frame with
clean water.
For cubic type ice maker, clean the upper pipe part of the evaporator.
Step 6: Place the cleaned parts back in place and put the remaining 3 liters (1 liter for cubic type)
into the water container.
Step 7: Turn on the ice maker. (At this time, the switch of the ice maker is OFF)
Step 8: To start automatic cleaning, turn the switch to WASH.
Step 9: After the automatic cleaning is completed (21 minutes for cubic type and 30 for vertical type),
set the switch to OFF. If there is cleaning solution still remains in the water tray, use the drain plug to
remove the cleaning solution. For cubic type ice maker, install drain plug again, put 1 liter of water into
the container, turn the switch to WASH, and circulate water again for 10 minutes. (Rinse function)
The vertical type ice maker with water supply/drain valve automatically rinses and replenishes water.
Step 10: Once the washing is complete and subsequently the rinsing is complete, it will remove the
calcareous substance in the internal piping. If bubbles and so forth are not fully rinsed inside the water
tray, repeat Step 9.
Step 11: Washing ends in Step 10. Step 11 is sanitization. Sanitization should be performed at least once
a month. Immerse all components in Step 3 in 2 liters of disinfectant/water mixture for 10 minutes to Sanitize.
If the parts are large, pour or spray the disinfectant/water mixture on the surface. When the Sanitization
is completed, rinse all components with the clean water (use the water directly from the tap to prevent
cross-contamination).
Step 12: Using the disinfectant/water mixture and a soft brush, rub and clean the inside of the ice container.
Rinse every corner of the inner door, door rails, tank, evaporator frame and rinse with clean water
(use the water directly from the tap to prevent cross contamination).
Step 13: Reassemble the components disassembled in Step 11 and leave the switch on OFF.
Step 14: Before proceeding with the sterilization cycle, pour 3 liters of disinfectant/water mixture into the
water tray. Turn the switch to the WASH to perform the automatic Sanitization cycle. The disinfectant/water
mixture will automatically run inside the piping to Sanitize.