iCES ITCD-433, Инструкция по эксплуатации

Страница: 15 / 34

REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO
EITHER CD, AUX OR TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET
DIRECTLY, FOR MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD
BEING PARTIALLY EJECT AND YOU CAN REMOVE IT BY HAND.
PHONO
NOTED:
-
REMOVE THE STYLUS PROTECTOR.
-
BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM
REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.
1. SELECT TO “ PHONO ” FUNCTION FROM FUNCTION SELECTOR (15)
2. SET THE SPEED SELECTOR TO THE PROPER POSITION DEPENDING ON
THE RECORD TO BE PLAYED.
3. PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR IF REQUIRED).
4. LIFT THE TONE ARM FROM THE REST AND SLOWLY MOVE IT TO THE RECORD SIDE.
THE PLATTER WILL START TO ROTATE.
5. PLACE THE TONE ARM TO THE DESIRED POSITION OF THE RECORD.
6. ADJUST THE VOLUME TO THE DESIRED LEVEL.
7. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. LIFT
THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST.
8. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST.
IMPORTANT REMARK : AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING,
SO IT WILL STOP BEFORE THE LAST TRACK FINISH. IN THIS CASE, SELECT THE AUTO-STOP SWITCH (29)
TO “OFF” POSITION. THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY
(TURN OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH TO “ON” POSITION
TO STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE REST POSITION.
LINE OUT CONNECTION
YOU CAN CONNECT THE SYSTEM TO YOUR WHOLE HI-FI SYSTEM BY CONNECTING THE LINE OUT SOCKET
(26) TO THE AUXILIARY INPUT SOCKET WITH A RCA CABLE (NOT INCLUDED).
REMOTE CONTROL TRANSMITTER
BATTERY INSTALLATION (BATTERY NOT PROVIDED)
THE INFRA-RED TRANSMITTER REQUIRES 2 PC AAA SIZE BATTERY FOR OPERATION
BUTTON DESCRIPTION
1) FIND IN MP3/WMA MODE, PRESS TO ACTIVE FILE/FOLDER
NAME SEARCH FUNCTION.
2) INFO IN CD/USB STOP MODE, PRESS TO SELECT ENCODING
BITRATE
3) REC IN CD OR PHONO MODE, PRESS TO ACTIVE
RECRRDING FUNCTION
4) REP/INTRO/RAN IN CD/USB MODE, PRESS TO ACTIVE REPEAT / INTRO /
RANDOM FUNCTION
5) PROGRAM IN CD/USB MODE, PRESS TO ACTIVE PROGRAMMING
FUNCTION
6) PLAY/PAUSE IN CD/USB MODE, PRESS ONCE TO START PLAYBACK.
PRESS AGAIN TO ENTER PAUSE MODE.
7) SKIP/SEARCH FORWARD PRESS ONCE TO SKIP TO NEXT TRACK, PRESS & HOLD
FOR SEARCH FORWARD
SKIP/SEARCH BACKWARD PRESS ONCE TO SKIP TO PREVIOUS TACK.PRESS &
HOLD FOR SEARCH BACKWARD
8) STOP IN CD/USB MODE, PRESS TO STOP PLAYBACK OR CANCEL THE STORED
PROGRAM.
9) FOLDER UP /DOWN IN MP3 MODE, PRESS TO SELECT FOLDER UP OR DOWN
10) SOURCE IN CD/USB MODE, PRESS TO SELECT CD OR USB FUNCTION REPEATLY
11) TRACK SEPARATION PRESS TO SPLIT PHONO RECORDING TRACKS DURING ENCODING
E-6