iCES ICR-240, Инструкция по эксплуатации

Страница: 5 / 37

OFF / NA
P utto to tur
radio on or off.
1. For setting alarm time 1 with buzzer, p
ress ALARM / VOL –
button (4) and
indicator (E)
will flash. For setti g alar ti e with radio, press ALARM /
VOL
– utto
4) twice and indicator (F) will flash.
2. When the digits are flashing, p
ress HOUR / TUNING – utto
repeatedly to
change the hour setting.
Press
MIN / TUNING
+ utto
repeatedly to change
the minute setting.
3. P
ress ALARM / VOL –
button (4) to confirm.
4. To cancel alarm, press
ALARM
1 / VOL
–
button (4) three times when the
current time is showing. The alarm indicators will be off.
5. When the alarm sounds, press any button
to tur off alar or press
SNOOZE /
SLEEP / DIM
button (1) to enter snooze mode. or will blink during
snooze mode. Alarm will sound again after 5 minutes. Alarm buzzer does not cut
the radio sound. If alarm waken up by radio, volume control for radio is not
available.
6.
Follow the sa e i stru tio s for alar with ALARM / VOL + utto
(8).
Note:

You must make the time and alarm time adjustments while the display is flashing.
The display will stop flashing after approximately 10 seconds if adjustments are
not made.

If two alarms are set together, for example alarm1 set to buzzer alarm and alarm2
set to radio alarm, when buzzer is activated by alarm1 and radio is activated by
alarm2, the previous alarm does not stop automatically and has both buzzer and
radio sound together.
RADIO
General Operations
1. Press the
ON/OFF/NAP utto to tur radio o a d off.
2. For manual tuning, press
HOUR / TUNING – utto
or MIN / TUNING
+ utto
for increments of 0.1mHz.
3. For automatic tuning, press and hold down
HOUR / TUNING – utto
or
MIN / TUNING
+ utto
for approximately 3 seconds. Depress the button
and the radio will start to scan for the next available station.
4.
Press ALARM / VOL – utto or ALARM / VOL + utto to adjust