15
CLEANING
YOUR iWASH
For your safety, make sure the seat is powered OFF
AND
unplugged before cleaning.
WARNING: TOUCHING THE PLUG OR OUTLET WITH WET HANDS
MAY RESULT IN ELECTRIC SHOCK.
•
Turn off the water supply by turning the wall angle stop clockwise.
•
Detach the transfer hose from the t-valve and the seat. Remove the mesh filters from
both ends of the hose.
•
Rinse the mesh filters. Clean the valve gently with a soft brush.
•
Re-insert the filters and reattach the transfer hose. Turn on water supply by turning the
wall angle stop counterclockwise.
•
The external casing of the seat is made of a plastic that may be damaged by coarse
brushes / pads, harsh chemicals, etc. Test any household cleaner on a inconspicuous
area before using. Do not use toluene, mineral oil, heptane and nitric, chromic or sulfu-
ric acids to clean this product.
• Unplug before cleaning. Do not splash water on the plug or outlet.
•
Clean with a soft, wet cloth. Wring out excess water from the cloth before cleaning.
• Do not spray water onto the unit.
•
Press the CLEAN NOZZLE button once to extend the nozzle.
•
Clean the nozzle gently with a soft brush.
• Do not pull the nozzle out or exert force while cleaning. This may cause product
damage.
•
Press the STOP button on the remote to return the nozzle to its resting position.
•
Press the CLEAN NOZZLE button on the top of the remote control twice to active the
self-clean function.
•
The self-clean cycle will activate for 15 minutes. Press STOP button to end cycle early.
•
Do not push or pull the nozzle while the self-clean function is active.
FOR MORE EXTENSIVE MANUAL CLEANING:
FOR SELF-CLEAN FUNCTION:
CLEANING THE WATER FILTER
EXTERNAL CLEANING
CLEANING THE BIDET NOZZLE
Содержание S1201
Страница 2: ......
