3.
Plug the power cord for direct current into the DC socket on the appliance. (See
Fig.)
4.
Connect the appliance to the cigarette lighter in the motor vehicle.
5.
Set the switch to COOL for cooling or to HOT for keeping warm.
NOTE:
Save the battery of your motor vehicle. Only run the appliance in the motor vehicle while
the engine is running.
Terminating operation
There is no automatic shut-off . The appliance runs permanently while it is connected to a
power supply and switched on.
1.
Set the switch to the “OFF” position.
2.
Unplug the power cord from the socket or the cigarette lighter.
3.
Unplug the power cord from the appliance.
Cleaning
WARNING:
Always unplug the power cord from the appliance and from the socket / the
cigarette lighter!
Never immerse the appliance in water! Otherwise this might result in an electric
shock or fire.
CAUTION:
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
Use a moist towel to clean the inside and the outside. You may add a dish
washing liquid to the towel.
Dry it with a cloth afterwards.
Fasten the lid back into the holder.
Storage
Clean the appliance as described and allow it to dry.
We recommend that you keep the appliance in the original packaging if it will not
be used for long periods.
Always store the appliance out of the reach of children in a dry, well ventilated
place.
Troubleshooting
Appliance is not functioning
Possible cause:
The switch setting has not been selected correctly.
Remedy:
Check the switch setting.
