www.IceLed.co.uk
IceLed ltd
ZEN GUIDE v4
3
Remote Control quick-reference
For your convenience the remote control supplied with ZEN is a “universal” type that
can be programmed to operate up to four different devices. In addition to being used
to operate ICELED controllers it may therefore also be used to operate common
Audio/Visual equipment. As supplied the remote is set to operate ZEN on both of the
rightmost device buttons.
Note –
The remote control device code for ZEN is
0172
To assign a particular code to a
device select button
first press the target device
button then press and hold the setup button until the indicator lights. Finally enter
the four-digit code for your device. The indicator should go straight out. If it flashes
twice then the code is not allowed.
Program Edit mode
Hue
up
down
Saturation
more
less
Level
more
less
Program Play mode
Colour
range
up
down
Audio effect
range
up
down
Beat
divider
up
down
Activate programs 0 to 9
(Hold to edit programs)
Demonstration mode p<p
Program Play mode
Remote control
setup
Programs remote
control to operate
up to four
different devices
(See note below
for details)
Exit
Returns directly to
Program Display mode
from any other mode
Unused
by ZEN
Preset ‘pure hue’ selection
Program Edit mode
Adjust sweep speed
Program Play mode
Step thru Zones 1 to 4
(Hold to step thru additional
ZEN controllers)
Program Edit mode
Step thru programs 0 to 9
Hold for Strobe
Hold for program 0
Program Play mode
Audio activation
on/off
Power
on/off
Remote-controlled Device select