www.ICELED.co.uk
MATRIX GUIDE v1
2
R G B
Features
ICELED MATRIX is a compact digital light source capable of emitting an extra wide
beam in any of over two million different colours. Full colour mixing is obtained using
second-generation integrated RGB LEDs which eliminate colour shadowing and make
the source suitable for direct viewing at a safe distance. MATRIX has been designed
to complement and integrate with other devices in the ICELED range of networked
lighting products and can be connected directly to controllers such as UFO, ZEN and
ZAP. It can also function in a useful stand-alone mode allowing it to be used with
nothing more than a 12 Volt supply. This makes MATRIX a direct replacement for
neon and incandescent lighting in many applications – with the added advantage of
being able to produce almost any colour in the visible spectrum. As an additional
advantage
monobloc
construction makes MATRIX fully waterproof and capable of
withstanding permanent immersion.
Feature summary
•
Extra wide beam
•
Two-million colours
•
No colour shadowing
•
Directly viewable
•
Compatible with all ICELED controllers
•
Fully waterproof
Installation
MATRIX may be attached to any flat surface using the adhesive pad on the back of
the unit. The surface
must
be clean and dry prior to application of the adhesive pad.
It is therefore advisable to de-grease the surface with Isopropyl Alcohol or similar to
obtain the best bond (making sure to observe proper usage instructions for the
cleaning agent used). Firm hand pressure must be applied for at least 30 seconds in
order to ensure proper adhesion. Maximum strength will be obtained after 12 hours.
Wiring to ICELED controller
A standard three-core cable connects the device to a power supply and ICELED data
source.
+ 12VDC
– Chassis
Data
Red
Green
Blue
If the light source is to be connected to
an ICELED controller supplying both
power and data, then the colour coded
wires simply connect to the
corresponding terminals labelled R, G
and B on the chosen output.
