Icegame DB1100X Скачать руководство пользователя

Страница: 79 / 96

Version 3.0

Option /Description

Min/Max/Inc/Default

Attract Time - How often attract audio is played in 30 seconds increments

0/30/1/1

COIN 1 - Cost of play per pulse. Set to 1 if using card swipe.

0/9/1/1

DBV - Cost of play for DBV or Coin line 2. NOT A MULTIPLIER!

0/9/1/1

Ticket Multiplier - 0 = Play for fun, 1 = Normal 1 to 1 ticket, 2 = ½ tickets.

0/2/1/1

What a solo game must score to win the bonus.

0/50000/100/300000

What a solo game will win in tickets when bonus score is achieved.

0/2000/10/500

What a competitive game must score to win the bonus.

0/99900/100/50000

What a competitive game will win in tickets when the bonus score

is achieved.

100/2000/10/1000

What a player must score in solo play to win a ticket.

100/10000/100/1000

What players must score in competitive play to win a ticket.

100/10000/100/500

Minimum ticket payout

for each player per game.

1/100/1/10

Amount to subtract per solo game from the bonus score if bonus has

not been won.

100/1000/10/100

13 Amount to subtract per competitive game from the bonus score if

bonus has not been won.

100/1000/10/100

Increases the score needed to win bonus per solo game. 0 disables this. 0/10000/500/2500

Increases the score needed to win bonus per competitive game.

0 disables this option.

0/10000/500/5000

Fixed Tickets enabled/disabled. 0=disable, 1=enable.

0/1/1/0

Pays this amount no matter what is won if fixed tickets are enabled.

1/100/1/10

Maximum multiplier per round. 1 = disable multiplier.

1/3/1/3

Free game instead of tickets if bonus is won. 0 = disables this.

0/1/1/0

Allows to payout at the end of each competitive game or stack the payout.

0/1/1/0

Factory Reset (won’t reset leaderboard or audits).

0/1/1/0

22, 23, 24 show Main board REV, Left front board REV, and Right front board rev respectfully.

Содержание DB1100X

































































































Результаты поиска

Содержание DB1100X

Отзывы:

Похожие инструкции для DB1100X

Бренды по названию

Популярные бренды

Icegame DB1100X, Руководство по обслуживанию

Результаты поиска

Содержание DB1100X

Отзывы:

Похожие инструкции для DB1100X

Бренды по названию

Популярные бренды