background image

29

ICE RS26L+ / RS32L+

OPERATOR MANUAL

FAULT CODE AND SOLUTION

The machine is equipped with a 7-inch touch 
screen (Machine components, # 14), the touch 
screen will display battery meter (Machine com-
ponents, #28), Date and Time (Machine compo-
nents, #29), and working accumulated hours 
(Machine components, #34).

When the machine detects a fault, the Fault icon 
will blink (Machine components, #39) on the 
touch screen occasionally accompanied by an 
audible alarm.

The Fault icon has 2 colors. Yellow icon rep-
resents a low level fault, you can click it to pop up 
a fault message window, it will guide you how to 
eliminate the fault.

Red icon represents a serious fault, the fault mes-
sage window will pop up automatically, you can 
not close it unless the fault has been eliminated.

Once the fault icon occurs, please DO NOT contin-
ue operate machine unless the faults have been 
eliminated.
Turn off the machine, to solve the fault, the fault 
icon will be eliminated when machine is restarted. 

If the same fault icon occurs frequently, or can’t 
be eliminated, please contact ICE service center. 

Please refer to the below table to determine the 
fault cause and the solution.

Содержание RS26L+









































Отзывы: