Ice iE410, Руководство оператора и каталог запасных частей, Страница: 6 / 23

ICE iE410
5
OPERATOR
MACHINE MAINTENANCE
To keep the machine performing well for many years, please follow the following maintenance
procedures.
Always confirm that the machine is unplugged prior to performing any maintenance or
repairs!!!
DAILY MAINTENANCE
1. When cleaning operation is complete for the day, drain and rinse the recovery tank
thoroughly with clean water.
2. Remove remaining solution from solution tank.
3. Remove float shut-off (ping pong ball in cage) from recovery tank and clean with water.
4. Remove and inspect spray jets. If necessary, clean jets in acetic acid solution.
Do not clean brass jets with a pointed object, as it will damage the jets.
5. Check brush assembly & remove any debris or carpet fibers.
6. Check pick up head and remove any debris or carpet fibers.
7. Check condition of the stainless steel pickup shoes on the pickup head. The shoes must
contact the floor for the whole length of the pickup head. Replace as necessary.
8. Clean machine with a nonabrasive cleaner.
9. Inspect power cable for any damage. Replace if necessary.
MONTHLY MAINTENANCE
1. Flush pump & plumbing with an acetic acid solution to dissolve any chemical buildup.
Mixing Instructions:
a) Premix 16 oz. or an acetic acid solution with 2 gallons of water and pour into solution tank.
b) Turn vacuum / pump switch on
c) Put machine head over floor drain and operate machine for 50 seconds.
d) Shut machine down and allow remaining solution to sit in machine overnight.
e) The following day, spray out remaining solution and flush system again with 3 gallons of
clean water.
2) Inspect machine for water leaks.
3) Lubricate wheels with a water resistance lubricant.
MACHINE STORAGE
1. Prior to storing the machine, ensure the solution and recovery tanks are clean and empty
of any solution.
2. Store machine in upright position in a dry area, with the brush head off the floor.
3. Remove recovery tank clear lid to allow for air circulation.
If you are storing the machine in an area which can freeze, be sure both tanks and
the solution plumbing are empty of all water and dry!