Ice iE410, Руководство оператора и каталог запасных частей, Страница: 4 / 23

ICE iE410
3
OPERATOR
SELF-CONTAINED EXTRACTOR SET-UP
Carefully check the shipping carton for signs of damage. Report any carton damage to carrier
immediately.
Read operators manual thoroughly prior to operating or
servicing this machine!!!
Check carton contents to ensure carton is complete. Contact your ICE distributor if anything is
missing.
Contents:
- Carpet Extractor - 50’ extension power cable
Read operators manual thoroughly prior to operating or servicing
this machine!!!
1. Using a hose or bucket, fill tank with a maximum of 10 gallons of hot water.
2. Add distributor recommended cleaning solution.
Do not use flammable liquids or operate machine in or near
flammable liquids or vapors!!!
3. Connect the supplied extension power cable to the machine. Plug cord into a grounded wall
outlet. (see grounding instructions)
4. Drop the brush head to the floor with the foot release pedal on the back
of the machine.
MACHINE OPERATION
PRIOR TO EXTRACTING CARPETS
1. Inspect power cable and extension cable for damage. Replace cable if damage is found.
2. Vacuum carpet to remove debris prior to extracting carpet.
CARPET EXTRACTING
1. Turn on vacuum / pump switch.
NOTE: Solution will only spray when the brush / spray button is pushed.
2. To start cleaning, push the brush / spray button and begin to pull the machine backwards.
NOTE: For best cleaning results, pull back on the machine at a pace of approx. 10 feet in 15
seconds.
3. Release brush / spray button at the end of the path, and continue to pull machine back for
another 12 inches to pick up excess solution.
4. Tip machine back onto the transport wheels and push forward to begin next path.
5. During pickup, the float shut-off will automatically prevent water from entering the
recovery tank once the recovery tank is full.