Ice ID10, Руководство оператора и каталог запасных частей

Страница: 4 / 12

Operation of the Canister Vacuum
ICE ID10
3
OPERATOR
Read operators manual thoroughly prior to operating or servicing
this machine.
DRY PICKUP.
3) Connect vacuum hose to inlet on the machine body.
4) Choose appropriate tool, and attach it to the free end of the hose.
5) Plug power cord into grounded outlet.
Be sure the machine is not plugged into an outlet.
1) Remove the vac head of machine and confirm that there is either a cloth of paper filter in
place.
2) Replace & the latch vac head.
STORAGE
1) Unplug machine from power source and wrap cord on handle.
2) Attach the combination tool to the holder .
3) Store in upright position in a dry area.
MAINTENANCE
To keep the machine performing well for many years, please follow the following
maintenance procedures.
Always confirm that the machine is unplugged prior to performing any
maintenance or repairs.
1) Unplug machine as soon as you are done using it.
2) Check power cord for any damage. If any damage is detected, replace the cord immediately.
3) Lubricate casters with a water resistant lubricant every month
4) Check machine for loose or missing nuts and bolts, and replace as necessary.
5) Check the filter, and clean it after each use
6) Remove the vacuum hose and check it for any holes and clogs
7) Clean the outside of the machine with a mild cleaner
Do not use an extension cord in conjunction with the standard power cord.
6) To start the machine push on the red rocker switch turn on.
7) Check the filter bag periodically to see if it is full. For optimal performance, replace the
bag when it is 3/4 full.
8) This machine is designed to be pulled around by the vacuum hose, so pull the hose, and
the vacuum will follow.
9) To stop the machine at any time, simply turn off the rocker switch