7
Swing the rear section of the frame up and to
the left. Be sure to lift the chaintubes as shown
in the photo. This will allow the chain to fold
over properly.
Put the neoprene mat between any parts that
touch after the fold.
Swing the QR and its connecting pin
backwards 90 degrees.
Lift the QR and its pin to release the safety
catch.
Unfolding your trike is the same sequence in
reverse order. To unfold your trike:
•
Swing the rear section of the frame up and
to the left and then down to the unfolded
position.
•
Put the neoprene mat in a safe place for
next time you fold the trike.
•
Lift the QR (Quick Release) latch to retract
the safety pin, and close the hinge. Make
sure the safety pin is properly engaged.
•
Swing the QR and its connecting pin
forwards 90 degrees (into the slot on the
front part of the hinge).
•
Tighten the QR on the hinge. If the QR is
loose, the adjusting nut may be tightened
slightly.
•
Release the QR on each handlebar and
swing them forward until each is vertical.
Re-fasten each QR.
•
Put the seat in place and slide the clips on
the bottom seat rail over the frame cup in
which the seat sits.
•
Tighten the knobs under the front of the
seat.
•
Secure the seat angle adjustment onto the
QR and tighten the QR.
•
Make sure everything is secure before
riding your trike.
5
6
7
