background image

35

7.5 Contacting us

Your first point of contact should be your local 
dealer. They will be able to answer most of your 
questions and can provide you with the full line 
of ICE accessories.  If you need to speak to us 
directly, we can be contacted in a number of 
ways: 

In person;

Inspired Cycle Engineering Ltd

Unit 9

Tregoniggie Industrial Estate

Falmouth

Cornwall 

TR11 4SN

England

UK

Telephone:  01326 378848
                     (+44 1326 378848 outside UK)

Fax:           01326 379879
                  (+44 1326 379879 outside UK)

E-mail:       [email protected]

Website:     

www.icetrikes.co

Skype:      inspired_cycle_engineering_ltd

7.3 Liability information

Liability Waiver:

Taking part in any sporting activity can result 
in injury or death. Cycling is no different in this 
regard, and recumbent tricycles no different 
from upright bicycles. In many ways, recumbent 
trikes can be much safer than standard bicycles. 
Nevertheless, the rider (that’s you) is expressly 
assuming the risk for any injury and/or property 
damage that may result from using our product, 
as well as for any and all injuries and/or property 
damages caused by someone riding your trike. 

We have no control over how the trike is used 
or maintained. It’s your trike; it is up to you to 
be responsible for yourself. You need to ensure 
that the trike is safe each time before you ride 
it. You need to ensure that it is maintained to 
a proper standard. Read and understand this 
manual; it has warnings and suggestions that 
will help you to use the trike safely. If you are in 
any doubt about any of the advice or procedures 
in this manual, please contact your dealer or 
ICE. It is up to you to know and obey traffic laws 
of the country or state where you will be riding 
your trike. Pedal cycles are regarded in most 
countries as vehicles when on the road and are 
subject to the same rules as motor vehicles. 

7.4 Legal requirements

Legal requirements vary from country to country 
and you should always comply with them. 
The important areas you need to consider are 
lighting, and helmet use. Consult your local bike 
dealer for information about what is required in 
your area. Please also remember that even if 
not required by law, some equipment (such as 
helmets and lights) can increase your personal 
safety and should be carefully considered.

If you are not comfortable on the road, or 
have little experience riding in traffic, try 
practicing riding on quieter streets, at least 
until you develop the necessary skills and 
road awareness. Many bike shops can offer 
instruction on advanced riding techniques. 
Inspired Cycle Engineering shall in no event 
be liable for incidental or consequential losses, 
damages or expenses in connection with its 
tricycle products. 

Содержание Bicycle 2012









































Отзывы: