Ice-O-Matic HISU055 Скачать руководство пользователя страница 10

July 2013

Page 9

User Manual for Models HISU055, HISU075, HISU095

Ice Bridge Thickness Adjustment Area

Master Switch. Move to ON (left side depressed) to make ice, OFF 
(centered) to shut off and WASH (right side depressed) for use in 
cleaning.

Harvest Time Adjustment Area

Indicator Light Area. 

Freeze mode light is ON when unit is in a Freeze cycle. 

Timer On light is ON when trigger point temperature is reached in 
Freeze or Harvest.

Harvest Cycle Time Adjustment

After ice has formed in the inverted mold, it must be 
released so it can be deposited in the storage bin 
section. The harvest cycle is when that occurs, and 
must be long enough for the ice to release. While the 
harvest cycle length is self adjusting it can also be 
manually adjusted if needed. 

Proper harvest time is when the ice falls into the 
bin and there is about 10 seconds extra harvest 
time (pump and fan are off) before the freeze cycle 
restarts.

If the harvest time is too short to release the ice, 
the time may be increased by pushing the + sign on 
the harvest time adjustment section of the control 
panel. Operate the machine for another cycle to 

confirm that the adjustment was correct. Note that too 

much harvest time will slightly decrease making ice 
capacity.

Control Panel and Adjustments

Adjustment Indicator Lights 

Each push and release of the + or - button will change 
the lights that glow or blink indicating a change in ice 
size or harvest time. Example: p one time 
changes a blinking light to steady on type. If the lights 
are on steady a single push of + will add one more 
light to the right and it will blink. All 5 lights on steady 
is the maximum setting and one blinking light is the 
minimum.

Ice Too Thin

Ice Too Thick

Ice Just Right

Bridge

Ice Thickness Diagram

Ice Bridge Thickness Adjustment

Refer to the Ice Thickness Diagram for proper ice 
size.

Adjust by pushing the + sign or – sign on the ice 
bridge adjustment section of the control panel. 
Changing bridge thickness should be a one-time 
adjustment as the machine will automatically maintain 
that ice thickness. 

-

+

-

+

Ice Bridge Thickness Adjustment

Réglage de l'épaisseur du pont de glace

Ajuste del espesor del puente de hielo

Regolazione spessore ponte di ghiaccio

Anpassung der Eisbrückendicke

Harvest Time Adjustment

Réglage du temps de récolte

Ajuste del tiempo de cosecha

Regolazione orario di raccolta

Anpassung der Erntezeit

ON   /   OFF  /   WASH

MARCHE / ARRÊT / LAVAGE

ENCENDIDO / APAGADO / LAVADO

ON / OFF / LAVAGGIO

EIN / AUS / WASCHEN

Freeze Mode 

Mode de congélation 

Modo de congelamiento

Modalità congelamento

Gefriermodus

Timer On

Minuterie allumée

Cronómetro encendido

Timer attivato

Timer eingeschaltet

17-3386-01

Содержание HISU055


















Отзывы: