Ice-O-Matic GEM Series, Инструкция по установке, запуску и техническому обслуживанию

Страница: 18 / 29

GEM-MFI SERIES For the Electrician
Page 14
Electrical Connections:
Check the ice machine nameplate (located on the back panel) for the voltage requirements, and minimum
circuit ampacity. The ice machine requires a solid chassis to earth ground.
Connect the ice machine to its own electrical circuit so it is individually fused. Voltage variation must remain
within the limitations, even under starting conditions.
Note: All external wiring must conform to national, state and local electrical codes.
The use of a licensed electrician is required to perform the electrical installation.
Power
Supply
Electrical Inlet
Water Cooled Models
Air Cooled Models