ICE Games Frogger, Руководство владельца и по обслуживанию

Страница: 11 / 31

11
PC Access and Removal
The PC is located behind the circuit board. The circuit board and PC are mounted onto the back drawer
assembly. Remove the lower back cabinet door. At the bottom of the cabinet and underneath the cir-
cuit boards is a large thumb screw . Remove the large thumb screw and put aside. The back drawer
assembly can be pulled back. There is a handle at the bottom of the drawer assembly to pull on. To
remove the PC, disconnect all wiring to the PC and undo the mounting straps.
Restoring Software
To use a restore disc you must access the PC and insert the DVD into the computer’s DVD drive. To
access the pc follow the instructions under “PC Access and Removal”. You will need to do this with the
power on. Press the “open” button located on the DVD drive. Insert the DVD disc into the DVD drive
with the label side facing up. Now press the open button again to close the DVD drive’s door or slightly
push in the drawer and it will close automatically. Turn off the game and wait 5 seconds. Turn the
game back on and in a short time the screen will warn you that it is going to write over your hard drive.
If you wish to not continue turn off the game now. It will count down and begin installing the software.
This should be done if you experienced data corruption, replaced the hard drive, received updated soft-
ware or told to do so by ICE technical representative.
Game Maintenance