29
your complete satisfaction.
CAUTION:
The high pressure brake is used by disc brake
system. To ensure the safety, the replacement interval
should not be more than that stipulated in
“MAINTENANCE SCHEDULE” of this manual
When performing the periodical check, the following
state of brake system should be checked.
1) Dripping or not
2) Crack tube or not
3) Keep the certain recovery
4) Wore brake pads
WARNING:
When the new brake pads begin to be used, don’t
ride your motorcycle immediately after the
replacement. Apply the brake, release it. Repeat this
procedures several times and allow the brake fluid to
circulate normally.
TYRES
Check your tires for both wear and inflation
pressure to ensure the riding safety before riding and
when performing the periodic inspection.
NOTE:
This motorcycle is traffic-motorcycle. Riding on
the hill road, desert, rugged road and rainy road will
invite troubles. Disobeying the stipulation will cause
serious dangerous.
TIRE PRESSURE
Improper tire pressure may not only hastens tire
wear but also serious affects the stability of the
motorcycle, over inflation may result in the reduction
of the contract area between the tires and ground,
which may cause side slip of motorcycle and loss of
the control to the vehicle. Therefore tire pressure
should be within specified range. Adjust the air
