Iccons GT-6, Руководство пользователя

Страница: 10 / 20

ICCONS
®
GAS TOOL GT-6 & GT-6ST USER MANUAL
10
March 2017 revision 1
5 - TROUBLESHOOTING
WARNING:
To reduce the risk of seri-
ous personal injury, ALWAYS
unload the battery, the pins
and fuel cell from the tool
before all repairs.
5.1. Battery / Charger Problems
SYMPTOM 1
Battery Cell does not appear to accept charge.
Green charger light does not come on after several
hours.
Possible reasons Services
Inoperative
indicator lights on
charger. Try Battery in tool after 1
hour on charge cycle. If tool
functions properly charger
lights are not working
correctly. Replace charger,
or monitor time to ensure
Battery Cell has adequate
time for recharging. It’s
normal for Battery to
feel warm after properly
charging.
Damaged charger. Discontinue use
immediately and unplug
from power source.
Replace charger and tag
or dispose of charger to
prevent accidental reuse
or connection to power
source.
SYMPTOM 2
Red LED on charger is blinking.
Possible reasons Services
Battery is hot. Remove battery from
charger and allow to cool.
Inspect battery charger and
cartridge.
SYMPTOM 3
Orange LED on charger is blinking.
Possible reasons Services
Charger damaged. Replace Charger.
5.2 Normal Stage Of Operation
SYMPTOM 1
Fan does not run.
Possible reasons Services
Battery is not
charged. Charge Battery according to
Operating Manual.
Battery
Terminals or
Handle battery
contacts are oily,
dirty, or corroded. Clean Battery Cell terminals
Clean Handle Battery Cell
contacts as required.
There is electrical
short somewhere. The tool must be looked
into by Authorized Service
agent.
SYMPTOM 2
Fan does not run, or runs slower than normal.
Possible reasons Services
Battery is
discharged. Charge Battery Cartridge.
SYMPTOM 3
Fan runs intermittently.
Possible reasons Services
Battery is loose or
contacts are bent. Snap battery back into
its locked position. Bend
contacts back into proper
position by Authorized
Service agent.