ICX420GAP Manual
29
Below is a listing of the description of the fields on the Radio display.
Radio
Choose the configured RF.
Status
Enable/disable the RF.
Mode
The PHY standard used by RF.
Channel
Choose the channel.
Channel bandwidth
The channel bandwidth of 802.11n mode.
Primary channel
The mode of the primary channel (only the 802.11n
mode is supported)
Short guard interval supported
Configure the short guard. (only the 802.11n mode is
supported)
STBC mode
Configure the STBC mode. (only the 802.11n mode is
supported)
Protection
Configure the protection function.
Beacon interval
Configure the Beacon interval.
DTIM interval
Configure the DTIM interval.
Fragment threshold
Configure the fragment threshold.
RTS threshold
Configure the RTS threshold.
Maximum stations
Configure the maximum number of associated
stations.
Transmit power
Configure the percentage of the RF transmission
power.
Fixed multicast rate
Configure the supported multicast rate.
Rate sets
Configure the transmission rate set and the basic
broadcast rate set that supported by RF.
