ICARO SQUARE Light 90, Руководство пользователя

Страница: 7 / 14

Page 6
4. The SQUARE light is a square rescue parachute with four corner points, so lay
out the canopy with one corner at the bottom, one on the left, one on the right
and one on top. Start with the first corner at the bottom and smooth the
material by running your hand along it on the table
5. Pull the base from each line attachment
point to the next along the seam to the
side you are sorting and smooth out the
crossed panel.
A line separator and a weight will help to
secure the already sorted lines.
6. Lay out the next panels in a rectangular
fashion. They will be slightly easier to lay
out.
7. Identify the corner that points to one of the sides. This is also to be laid out in a
crossed fashion, as shown.
8. Continue with rectangular panels until the next corner is reached, which is now
the uppermost one and last on this side. Make sure to leave an open channel
through so that the table underneath is visible.
9. Repeat steps 4 to 8 for the second side.
10. Return to the channel and run hands
along the connecting points of the
middle lines until they are free of the
material.
11. The extra material simply can be
pushed up inside the channel as
shown.
The reason for this is to prevent the material from burning during a deployment.
12. Panel sorting is now complete.
13. Inspect the middle line towards the main riser to see if the middle line is free.
14.
Fold the reserve chute with a “double-S fold “as shown and place the reserve
container with the line pocket in the direction of the base/main riser.