ICARO paragliders Nikita 5, Руководство пользователя

Страница: 12 / 15

Page 12
Annex
User’s needs for Inspections
You will need the following items in order to perform a paraglider inspection:
o
Standardized inspection report
o
Porosity meter
o
Spring scale
o
Equipment for measuring line lengths
o
Equipment for line strength testing
o
Sewing machine
o
Big, clean and bright room
Technical specifications about your glider (type, serial number, size and year of
production). Please call ICARO paragliders for information.
A three week course at
ICARO paragliders
, specified to a glider type together with a legal
flight license is the necessary prerequisites for permission to inspect ICARO
paragliders.
Inspection Instructions
Record Information
Spread out your paraglider in a big bright room and make a note of information
such as model, type and serial number.
Porosity Test
Use your porosity meter to perform porosity checks at 4 different places of the
canopy. The results are recorded in the inspection protocol and are to be
evaluated according to the internal guidelines of the workshop.
Visual Control of the Canopy
Hang up the canopy so that you can do a visual check of your canopy. Check for
perforations in the upper and lower sailcloth, damaged stitching between the cells,
and damage to the leading/trailing edge reinforcements.
Each cell must be checked.
Visual Control of the Risers and Lines
Check the risers, the trimmers, the stitching at each line loop, the brake lines, all
seams and line contact points. Each line must be measured and inspected for
kinks.
Strength test of the lines
One complete A-and B- line must be removed, measured and submitted to a
strength test. The measured value of each individual line must be noted in the
inspection protocol. The minimum of the lines strength are 125% of the normative
guidelines.
Measurement of the lines
Measure every single line while stressing it with defined tractive force (5daN).
Compare with the line plan. The lines must be measured between fixing point on
the line lock and fixing point on the line loop.