TECHNICAL DATA
Model: JDL-153B. Voltage: 100-240 V ~ 50/60 Hz.
Power: 38 W.
TECHNICAL DATA
Model: JDL-153B. Voltage: 100-240 V ~ 50/60 Hz.
Power: 38 W.
25
24
IMPORTANT SAFETY INSTRUCTIONS
EN
GENERAL DESCRIPTION
EN
18. Do not place the appliance on unprotected polished surfaces.
19. Always make sure that your hands are dry before you touch the
plug or switch the appliance on.
20. Do not use on artificial hair.
21. Do not drop the appliance onto a hard surface.
22. If the supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similarly qualified persons in order
to avoid a hazard.
➊
Removable protective attachment
➋
Ceramic and tourmaline plates
➌
Temperature switch
➍
Switch with indicator light
➎
Lock function – mechanism that snaps shut
➏
Revolving power cord attachment
FUNCTIONS OF THE STRAIGHTENER:
WARNING: Please note that your straightener
may become very HOT! Do not touch above or
around the ceramic-coated plates. Your
straightener may differ slightly from the
illustrations used in these instructions.
USING THE STRAIGHTENER:
STEP 1: For the best results, make sure your
hair is dry. Avoid using this straightener on
wet hair.
STEP 2: Connect the plug of the straightener
into the power supply socket. Switch it on and
give it time to heat up, so it is ready for you to
style your hair. Select the temperature you
want. If you have thin or short hair, you should
use a lower setting..
STEP 3: Take a section of your hair that
measures approximately 5 cm wide and even it
out using a brush.
STEP 4: Place this section of hair between the
straightening plates and close them. You need
to be careful not to touch the very hot plates or
the areas around them. Slide the plates evenly
and carefully along the section of hair. Repeat
this process for the next section of your hair.
Curl your hair:
STEP 1: If you want to curl your hair using this
straightener, you need to remove the comb
attachment and work horizontally to your
head, just like when you want to straighten
your hair. Move your hair upwards and away
from your head to lift your hair and to add
volume at the roots.
STEP 2: Slide the plates a small distance along
the section of your hair and then carefully turn
your hair back 180 degrees on itself.
STEP 3: Slide the straightener in an even,
careful movement along the hair towards the
tips while your hair is in this position.
STEP 4: Once you have reached the end of the
section of hair, you should turn it around your
1
2
3
4
5
6
Содержание JDL-153B
Страница 15: ...EMV Designbyr 11 2018 v 8...