To avoid electric shocks, fires, injuries, and other serious accidents, read the following
instructions carefully before use. Please contact us if you detect any problems. Due to
product improvement, the product you have purchased might differ slightly from that
described in the manual.
SAFETY PRECAUTIONS
1. This product is not waterproof or submergible.
2. Keep the external operating temperature of this product within the range
of 0-35ºC.
3. Do not use excessive force during assembly, installation and use.
4. Do not use this product where the power supply is unstable.
5. Do not install it near other electrical appliances.
6. The surface temperature increases quickly after use. Switch the product
off and do not touch it. Wait for it to cool completely before carrying out
any maintenance or other operations.
7. Under no circumstances may the power cord be bent or tied too tightly. If
it is damage (exposed wire, broken cable, etc.), stop using it immediately.
8. Do not look directly at the LED light when it is on.
9. The light takes a few seconds to switch on, this is normal.
10. The electronic ballast emits a small sound when it is running.
11. May sure the lighting appliances do not become dusty. Should ash fall on
them, use a blower to remove the dust.
12. If not in use for a long time, leave it in a dry, ventilated place.
MAINTENANCE AND AFTER-SALES SERVICE
If the product is in need of repair, contact the distributor for the after-sales ser-
vice. Furthermore, to avoid damage during transport, make sure it is packaged
carefully. If the damage to the product is not due to quality problems, contact
the sales representative or authorised store in order to purchase the relevant
accessories or pay a maintenance fee. Faults caused by improper installation,
misuse and other reasons are not covered by the warranty. Manipulating,
dismantling or transforming the product is strictly forbidden. Our company will
accept no product repair or customer complaint in the event of any manipula-
tion, repair or transformation.
WARRANTY CONDITIONS
1. Two-year warranty. If the fault is not due to misuse but is related to the ma-
terial and design of the product, replacement or maintenance will be free
of charge for these two years (to replace the product, its appearance must
not be damaged so that it can be sold). Following the two-year period, any
replacement expenses will be charged.
2. If the product does not work because of a serious problem, it can be retur-
ned to the factor (N.B. you must make sure its appearance is not damaged
and pay for all delivery costs). The refund will be made after the product
has been received.
3. Technical support for the products sold.
4. Free maintenance does not include damages not attributable to our com-
pany due to:
Incorrect installation. Voltage incompatibility. Incorrect use by not following the opera-
tion instructions. Maintenance or modification not authorised by the company. Lack of
the necessary maintenance. Inadequate operating environment. Damage caused by the
user´s secondary transport. Fault not attributable to our products. Force majeure due to
natural disasters (lightning, earthquakes, tsunamis, etc.) and accidents.
