© 2013 I-View Now, LLC. All Rights Reserved.
ICRealtime Flex4/8/16E Installation Guide rev 1.0
Page 7
SMTP Settings
This section describes how to set up SMTP (email) on the DVR to allow Alarm notifications to be sent to I-View Now.
Navigate back to the general network settings interface
Under the advanced settings submenu use the scroll bar
to scroll down to EMAIL.
Double click EMAIL to enter EMAIL setup
Enter
ivnview.com
for the
SMTP server
Enter
3480
for the
Port
For Sender, Enter the SMTP ID from the Installer’s
Worksheet.
For Receiver, Enter the SMTP ID from the Installer’s
Worksheet.
Yes, Sender and Receiver are the same
Ensure
Enable SSL is NOT Checked
Set Event interval to 5
Click Test
Click OK
Test Failure can occur if the SMTP Server, SMTP Port,
SSL/TLS, DNS, or Firewall settings are incorrect. This
Test will not verify that the Sender and Receiver are
correct. It just verifies connectivity to the I-View Now
SMTP Server.
Network settings can be reached
from the settings menu
Email Setup Interface. Reachable through
Network Settings interface
