© 2013 I-View Now, LLC. All Rights Reserved.
ICRealtime Flex4/8/16E Installation Guide rev 1.0
Page 11
Motion Recording Setup (optional)
Motion recording can be configured for any desired camera, but it is not mandatory for the I-ViewNow System. At a
minimum I-View Now requires Alarm event recording to be enabled even if motion recording is enabled because it is
possible for an alarm event to occur when there is no motion on the correlating camera.
From the Settings Menu
Click the Detect Icon
For each Camera
Set Event Type Motion Detection
Set Channel 1
Set Sensitivity 3(suggested)
Click Select region
Selecting the bounding boxes
Can be utilized to exclude areas from
Motion detection
Set record channel to record the channel
Motion was triggered on. IE Channel 2
Should record channel 2
