IC Realtime AVR-816S Скачать руководство пользователя страница 35

Страница: 35 / 251

HD AVS

Standalone DVR User’s Manual

Overview of Navigation and Controls

4.1

Boot up and Shutdown

4.1.1 Boot up

Before the boot up, please make sure:



The rated input voltage matches the device power on-off button. Please make sure

the power wire connection is OK. Then click the power on-off button.



Always use the stable current, if necessary UPS is a best alternative measure.

Please follow the steps listed below to boot up the device.



Connect the device to the monitor and then connect a mouse.



Connect power cable.



Click the power button at the front or rear panel and then boot up the device. After

device booted up, the system is in multiple-channel display mode by default.

4.1.2 Shutdown

Note



Whe

n you see corresponding dialogue box “System is shutting down…” Do not click

power on-off button directly.



Do not unplug the power cable or click power on-off button to shutdown device

directly when device is running (especially when it is recording.)

There are three ways for you to log out.

a) Main menu (

RECOMMENDED

)

From Main Menu->Shutdown, select shutdown from dropdown list.

Click OK button, you can see device shuts down.

b) From power on-off button on the front panel or remote control

Press the power on-off button on the DVR front panel or remote control for more than 3

seconds to shutdown the device.

c) From power on-off button on the rear panel.

4.1.3 Auto Resume after Power Failure

The system can automatically backup video and resume previous working status after

power failure.

4.1.4 Replace Button Battery

Please make sure to use the same battery model if possible.

We recommend replace battery regularly (such as one-year) to guarantee system time

accuracy.

Note:

Before replacement, please save the system setup, otherwise, you may lose the

data completely!

Содержание AVR-816S




























































































































































































































































Результаты поиска

Содержание AVR-816S

Отзывы:

Похожие инструкции для AVR-816S

Бренды по названию

Популярные бренды

IC Realtime AVR-816S, Руководство пользователя

Результаты поиска

Содержание AVR-816S

Отзывы:

Похожие инструкции для AVR-816S

Бренды по названию

Популярные бренды