IC Dynamics RS160, Руководство пользователя

Страница: 8 / 16

8
which then allows button 3 (normally used
for Auxiliary 1) to be used for the optional
Car Locator feature
(see Page 2 ). The second
option is for use as a negative (-) Starter out-
put for the Remote Start function which
then allows button 3 to be used for the
optional Car Locator feature. The default
setting is for Auxiliary 1 output which is acti-
vated by pressing button 3.
6. Auxiliary 2 Output. This output can be
programmed for one of three different oper-
ations. It may be used as a dome light out-
put, a passenger unlock output, or as a sec-
ond auxiliary output (default).
Menu 2
1. Valet Mode Timing. Sets the length of time
the valet switch must be held in order to
enter the valet mode- 15 or 5 seconds.
2. Parking Light Output. Sets the parking
light output to turn on for 30 seconds with
unlock or just flash twice with unlock.
3. Horn Honk Pulse Length. Some vehicle
horns may require a longer or shorter pulse
to provide the best horn operation. The
pulse can be set for 5ms, 15ms, or 10ms.
Menu 3
1. Tach Settings. There are two programming
PROGRAMMABLE FEATURES
(default settings in bold)
Feature Setting 1 Setting 2 Setting 3
Menu 1
1. Ignition L/UL On/On On/Off Off/Off
2. Horn Output Silent L/UL Normal
3. Door L/UL Pulses L / UL x 2 L x 2 / UL L / UL
4. Door Pulse Timing .25 second 3 seconds .75 second
5. Aux 1 Program (-) Accessory (-) Starter Auxiliary
6. Aux 2 Program Dome Light Passenger UL Auxiliary 2
Menu 2
1. Valet Mode Timing Hold 15 seconds Hold 5 seconds
2. Parking Light Output 30 seconds w/UL Flash 2x w/UL
3. Horn Honk Pulse 5ms (short) 15ms (long) 10ms (normal)
Menu 3
1. Tach Settings Hybrid Car 1 Hybrid Car 2 Auto Tach/Tachless
2. Over-Crank Adj Decrease 10%
3. Under-Crank Adj Increase 10%
4. Tach Check Wait 300ms Tach Delay 750ms Tach Delay No Tach Delay
Menu 4
1. Ignition 2 Relay 2nd Starter 2nd Accessory 2nd Ignition
2. Lock Control w/ Start UL before/L after Start L after shutdown only Normal L/UL pulses
3. Engine Type (-) Glow/20 sec timer Start w/ input wire Gasoline/(+) Glow
4. Factory Alarm Rearm With Lock only After start only After stop & w/L
5. Engine Run Time 4 minutes 45 minutes 15 minutes
6. Start Button Press twice to Start Press once to Start
7. LED Function No flash w/Locked Flash w/Locked
RS160manualRev3:BW2450.qxd 1/7/2010 2:24 PM Page 8