IC Bus CE Series 2020, Руководство по эксплуатации и обслуживанию

Страница: 92 / 287

Lights
Strobe Light
The optional strobe light comes on automatically unless
operated by a separate switch. Check your state regulations on
strobe light use.
Exterior Lamp Check
Switch Location
The switch to activate and deactivate the exterior lamp check
system is one of the right-side user switches located below the
Instrument Panel Gauge Cluster.
Function
The exterior lamp check is a feature that allows the driver to
conduct the exterior lamp check by themselves. The exterior
lamp check is included in the pretrip inspection section of this
manual. While the system is active, the driver can exit the bus
and visually inspect all lights on the exterior of the vehicle for
proper operation.
Activation
To activate the exterior lamp check:
• Turn the key to the ON or Accessory (ACC) ignition
position.
• All lights that will be checked must be turned OFF.
• The parking brake must be set.
• Place the exterior lamp check switch in the
ON (up) position. The exterior lamp switch ON
indicator will then illuminate GREEN.
Deactivation
To deactivate the system, do any one of the following:
• Press the exterior lamp switch to the OFF
(down) position.
• Move the ignition switch to the OFF, or ACC position.
• Manually turn ON lamps being checked with this feature.
• Release the parking brake.
When the exterior lamp check system is deactivated the GREEN
indicator on the switch will turn ON.
78