IC Bus CE Series 2020, Руководство по эксплуатации и обслуживанию

Страница: 248 / 287

Maintenance Intervals and Specifications
Lubrication and Maintenance Interval Chart Symbols Key
Symbol Interval Definition
A A interval: 10,000 miles (16,000 km) /
300 hours / 6 months
B B interval: 20,000 miles (32,000 km)
/ 600 hours / 12 months
Lubrication and Maintenance Interval Chart Notes
NOTE 1: Use a hand-pumped grease gun for optimal grease
distribution within the component joint.
NOTE 2: Lubricate Kingpin thrust washers with vehicle weight
on tires. Kingpins and kingpin bushings must be lubricated
with weight off of the wheels and tires.
NOTE 3: Certain services are performed at Special Intervals or
in addition to A or B Service when the interval dictates.
Lubrication and Maintenance Interval: Bus – CE (Diesel)
System Item Intervals Special Interval (3) : miles (km) / hours / months
Pre-Trip Inspection Pre-trip inspection Items listed in Section 2 – Check All
Wheel Bearing-Oil Type – Check Level A, B
Axle U-bolts – Retorque At first 1,000 miles (1,600 km) then every 36,000
miles (58,000 km) thereafter
Drag Link – Lubricate (1) A, B
Kingpins and Bushings – Lubricate (1,2) A, B
Shock Absorbers – Inspect A, B
Suspension Fasteners / Components – Check A, B
Tie Rod Ends – Lubricate (1) A, B
Wheel Bearings – Check End-play B
Wheel Bearing-Grease Type – Repack 30,000 (48,000) / – / 6
Front Axle
Wheel Bearing-Oil Type (including synthetic) – Change Oil 96,000 (60,000) / – / 6
234