
ic audio
RAC 02 + Media Player
ic audio GmbH
Boehringerstraße 14a; D-68307 Mannheim; Germany
Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26
E-Mail: [email protected]; www.ic-audio.com
24
EN
FM radio mode
16.2 Presets
To store an FM preset, press and hold
PRESET
until the display shows the Save preset
screen. Select one of the 10 presets to save the currently playing station.
To select a preset, press PRESET briefly, then select one of the listed preset stations. When a
preset station is playing, it shows Pn (P1, P2 etc) in the bottom right of the screen.
16.3 Now playing information
While an FM station is playing, the screen shows one of the two following sets data:
- If RDS information is available, by default the service name (i.e. station name) is
displayed. You can cycle through further RDS information by pressing INFO. Each time
you press Info, another set of information is displayed, cycling through RDS radio text,
RDS programme type, frequency and today's date.
- If no RDS information is available, the currently tuned frequency is shown.
16.4 Settings
Scan settings
By default, FM scans stop at any available station. This may result in a poor signal-to- noise ratio
(hiss) from weak stations. To change the scan settings to stop only at stations with good signal
strength, select Menu > Scan setting > Strong stations only? > Yes.
Audio settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss). To play weak stations in mono, select Menu > Audio setting > FM weak
reception: Listen in mono only > Yes.
17 AUX in mode
Aux in mode plays audio from an external source such as
an MP3 player.
To play audio with Aux in mode:
1. Turn the volume low on both the unit and, if adjustable, the audio source device.
2. Connect the external audio source to the Aux In 3.5 mm stereo socket.
3. Either press MODE until the display shows AUX in or select Menu > Main menu > AUX in.
4. Adjust the volume of the unit (and, if necessary, the audio source device) as required.