IC Audio RAC 02 + Media Player, Руководство пользователя, Страница: 58 / 72

ic audio
RAC 02 + Media Player
ic audio GmbH
Boehringerstraße 14a; D-68307 Mannheim; Germany
Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26
E-Mail: info@ic-audio.com; www.ic-audio.com
22
EN
DAB radio mode
15.1 Scanning for stations
The first time you select DAB radio mode, or if the station
list is empty, the unit automatically performs a full scan to
see what stations are available. You may also need to
start a scan manually to update the list of stations for one
of the following reasons:
- Available stations change from time to time.
- If reception was not good for the original scan (for example the antenna was not up), this
may result in an empty or incomplete list of available stations.
- If you have poor reception of some stations (burbling), you may wish to list only stations
with good signal strength.
To start a scan manually, select Menu > Scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but unavailable, select Menu > Prune invalid.
15.2 Selecting stations
To listen to or change a station, turn the Select control to view a list of stations and press to select.
Once selected, the station plays and the screen shows information about the station, track or show
as broadcast.
15.3 Presets
To store a DAB preset, press and hold PRESET until the display shows the Save preset
screen. Select one of the 10 presets to save the currently playing station.
To select a preset, press PRESET briefly, then select one of the listed preset stations. When a
preset station is playing, it shows Pn (P1, P2 etc) in the bottom right of the screen.
15.4 Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment)
information broadcast by the station giving real-time information such as programme name, track
title and contact details. Stereo broadcasts are indicated with an icon at the top of the screen. To
view further information, press
INFO .
Each time you press Info, another set of information is displayed, cycling through DLS text,
programme type, ensemble name/frequency, signal strength/error rate, bit rate/codec/channels
and today's date.