IBSG AMT-07M, Руководство по эксплуатации, Страница: 9 / 13

- 9 -
Fig.8.
The start/stop button of PD cooling with appropriate indicator.
8. Using the button “Display mode” (8) select the PD current indication mode. The
green LED indicator “Signal” (9) will be turned on.
Fig.9
. The button of display mode selection.
The LED indicator of the signal level indication mode.
NOTE! The signal level is printed on the display in conventional units.
9. Using the button “Amplif.coef” (11) select the requisite value of current
amplification. The appropriate LED indicator will be turned on (“×1”, “×10” or
“×100”). If the amplification of using PD will be too big you will see on the
display the symbol “1___”. In that case, the coefficient of amplification should be
decreased.
Fig.10.
The button and indicators of discrete changing
of current amplification.