IBSG AMT-07M, Руководство по эксплуатации, Страница: 7 / 13

- 7 -
5. Operating instruction.
1. Please take a PD with a cooler. Carefully combine its wires with pins of
connector “PD” (1) tightly till fixation (fig.2).
Note! Marked with the red point pin of connector “PD” must be connected with
the appropriate red wire of the PD (fig.2). In the case of wrong junction the PD can
be damaged.
Fig.2.
Observance of polarity during the connection
between the PD and the PD connector (1).
2. With the help of the synchronization cable connect the amplifier AMT-07M
(jack “SYNCRO” (6)) with the LED driver (for example with D-31 or DLT-37).
Figure 3.
Fig.3.
The polarity of jackplug of cable for synchronization.
Note! Without synchronization the amplifier readings can’t be true.
3. If necessary with the help of a cable connect the “Output” (7) of AMT-07M with
recording instrument (for example oscilloscope or analog-to-binary converter).
Figure 4.
Fig.4.
The polarity of jackplug of cable for external device connection.
4. Insert the jackplug of cable of AC/DC adapter into connector "+12V DC" (5).
The AMT-07M is operationally ready. Figure 5.
Fig.5.
The polarity of jackplug of power cable.