32
OPERATION INSTRUCTIONS
PREPARING THE EQUIPMENT
Figure 6. A
, presentation message;
B
, standard/default
SONOPULSE III
screen.
Note that as the standard/default screen is shown, an arrow indicates the word
Output
. This arrow indicates the
parameter to be programmed.
B
A
Check if the power cable is connected to the power supply on the wall. Press the
ON/OFF
switch to the
ON
position. The
display will show for a few seconds the presentation message which includes the model of the device and the programming
software followed by the standard
SONOPULSE III
screen (Figure 6).
