IBP HDC75, Быстрый старт и инструкции по безопасности

Страница: 2 / 12

SAFETY INSTRUCTIONS
Read this First
For your safety read and consider the safety instructions below carefully
•
Read carefully the entire user manual of the Biotech-Lab system before using the
Biotech-Lab system.
•
Read carefully the entire manual of the devices under test before connecting the
Biotech-Lab system to the devices under test.
•
The battery included with the HDC75 does not arrive fully charged. The battery must be
charged for a minimum of 2 hours prior to use.
•
Keep the devices away from unauthorized persons.
•
Make sure that all Biotech-Lab Modules have valid calibration certificates.
•
Only use the Biotech-Lab system in a dry environment and do not touch it with wet hands.
•
Prevent every mechanical overstraining of electrical wires.
•
If the acquired values seem to be not believable, make sure that the no device is defective.
•
Prevent electrostatic discharge on the connectors. This can lead to substantial damage of
the Biotech-Lab devices and devices under test. Make sure to be completely discharged
before touching the connectors or cables connected to the instrument.
•
Potentials above 42 V against earth ground are dangerous. This potentials can lead to
electrical shock and therefore to health hazards. Make sure that none of the connectors
has higher voltage than mentioned before.
•
Never open a device of the Biotech-Lab system. There are no serviceable parts inside.