page
8
Thanks to large accessories and additional extensions, the REVI250 USB monitoring system
can be used in sewers and pipes with diameters from DN50 to cca DN150. For DN50 to
DN150 use the push camera with the laminated cable rod attached on the push rod reel up
to 80 m length, designed especially for home sewerages or water supplies.
Power supply and connectors
The system is powered by AC voltage from 110 to 240V 50 or 60 Hz or supplied by internal
chargeable accumulator. An electric generator can be used if necessary.
In this case, only a generator designed for the electronics and computers can be used. This
type of generator has a converter on the output, which ensures supply with filtered voltage
and is protected against overvoltage. If you have doubts about your source, contact the
customer service or the IBOS a.s. technician who will assist you with finding a suitable
source. If you use an unsuitable source the system could be damaged.
Version AKU – LED function
Green LED
- POWER
off - the device is completely switched off
on - the green switch is turned on or the power cable is connected
Yellow LED
- CHARGING
off - the power cable is not connected
flashing - battery is charged
on - the battery is fully charged and the power cable is still connected
Red LED
– LOW BATTERY
off - from 100% to 20% of charge
on – less than 20% of charge
flashing - less than 10% of charge
Do not expose the batteries to the temperature below 0°C, it may cause
unrepairable dammage! If the batteries are discharged, charge them as soon
as possible! If the batteries are stored for a longer time, regulary check their
conditions and eventualy recharge them. The long term storage of
discharged batteries shortens their lifetime and may cause their dammage.
Control unit connectors
Without recording to USB storage
It is not necesary to turn on the USB recorder (black button „on/off“) if the recorded images
are not required. Only press the „Power“ button on the top panel.
For the control of camera use another control element such as the potenciometr “LIGHT” for
regulation of LED diods, red button “PROBE/R100” to turn on the sonde or REVI100 camery
REVI100.
Fuse F 3.15A
AC supply
connector
Cable drum
