IBM x3850 X5 7145, Инструкция по установке и эксплуатации

Страница: 57 / 102

Installing a QPI wrap card
Wrap card
Release
latch
If your server has more than two microprocessors installed, you must install two
QPI wrap cards in the server.
To install a QPI wrap card, complete the following steps:
1. Read the safety information that begins on page v and “Installation guidelines”
on page 25.
2. Turn off the server and peripheral devices, and disconnect the power cord and
all external cables.
3. Rotate the blue release latch on the QPI wrap card handle and pull the handle
to the open position.
4. Push the wrap card into the bay, and slide the handle to the locked position.
5. Reconnect the cables and power cords (see “Connecting the cables” on page
59).
6. Turn on all attached devices and the server.
Chapter 2. Installing optional devices
43