IBM WebPoint, Карта установки

Страница: 7 / 11

6 From the “Success” screen, click Next . EasyStart gives you the option of installing a browser. If you already have a browser, click
Next . If you do not have a browser, click Install Browser and follow the directions on the screen.
Note : If you are installing Netscape Communicator, open Communicator at least once to make it the default browser after the
installation is complete.
After you have successfully set Web Point’s IP address,
EasyStart will close itself. You may now set your computer’s gateway and DNS
server addresses.
Setting a Computer’s Gateway and DNS Server Addresses
A gateway address allows you to link different networks together. A DNS server address translates domain names to IP addresses. For
a detailed definition of gateway and DNS server address, see the “Glossary of Terms” in the
Reference Manual located on the
EasyStart CD. To set a computer’s gateway and DNS server address, follow these steps:
1 From the Windows Start menu, click Settings and then Control Panel.
2
Double-click Network .
3
In TCP/IP tab, change the following settings:
•
Click Gateway . Type Web Point’s IP address, , as the gateway address.
•
Click DNS . Click Enable DNS and type Web Point’s IP address as DNS server address. If requested, provide a host name for your
computer such as:
P\FRPSDQ\FRP
4
On the “TCP/IP Properties” screen, click OK. Click OK again.
If a message appears asking you to restart your computer, click Yes. Your computer will restart. You are ready to set up Web Point.
Setting Up Web Point for Internet Access
Open your browser and type Web Point’s IP address in the URL line. The Web Point “Home” page opens.
Set Web Point IP Address
5 From the next screen, click
Static IP address
, and then click
Next
. If your
computer does not have a static IP address, EasyStart presents a list of things you
must do. Click Next and EasyStart will attempt to contact Web Point. If it does not
find Web Point on the network, EasyStart displays a checklist, and requests that
you set the IP address. Follow these steps to set the IP address:
a
Click Set IP Address . Select an unused IP address that you want to
assign to Web Point.
b
Type the IP address you selected and the network’s subnet mask
values.
c Click OK .
Note: This address becomes the gateway address and the DNS server address for all
computers on your network.