IBM WebPoint, Карта установки

Страница: 3 / 11

Setting Up a New Network
The EasyStart CD contains the EasyStart application. EasyStart performs a series of system checks for your computer’s network card
and TCP/IP stack. To set up your computer using EasyStart, close any open browser windows and follow these steps:
1
Insert the EasyStart CD into the CD-ROM drive of your computer.
2
From the Start menu on the Windows taskbar, click Run .
3
In the Run dialog box, type:
CD-drive-letter
?VHWXSH[H
For example, if your CD-ROM drive is “D”, then type:
G?VHWXSH[H
Click OK . Then click EasyStart .
4
From the EasyStart “Welcome” screen, click Next .
EasyStart gives you a choice of Express Setup or Custom Setup. Click Express Setup , and then click Next . If EasyStart does not find
your network card, follow the steps in “Setting Up Network Interface Card Manually.”
5
EasyStart gives you the option of installing a browser. If you already have a browser, click
Next. If you need a browser, click Install
Browser and follow the instructions on the screen.
Note: If you are installing Netscape Communicator, open Communicator at least once after the installation is complete to make it the
default browser.
6
In the “DHCP Verifier” screen, click Configure Web Point .
7 Click Express Internet . The “Express Internet” page opens.
8 Type the information supplied by your Internet Service Provider (ISP) in
the appropriate fields.
9 Click Next .
If your ISP requires a Login Script, click Yes .
When Web Point connects you to the Internet, a successful completion
screen will be displayed.
Note: If Web Point is not successful, you will get an error message. Write
down the message and see “Troubleshooting” in the Reference
Manual.