This shows all devices attached to the Bus. To perform a Verify Media, highlight the drive you would like
to verify and press [ENTER]. Select Verify Media from the options.
If you wish to accept all settings, press [ESC] to exit out of the Adaptec settings.
Step 8: FDISK
Boot to a bootable diskette and type FDISK at the A:\ prompt. If Windows® 95 OSR2 or Windows® 98
are used, the following screen will appear.
IBM storage products
Page 16
IBM Hard Disk Drive Technical Support Center version 1.0
Adaptec AHA-3950U2B SCSISelect (TM) Utility v2.10.0
AHA-3950U2B at Bus:00h Device:0Dh Channel:A
SCSI ID #0:
IBM DRVSO9D
ULTRA2-LVD
SCSI ID #1:
No device
SCSI ID #2:
No device
SCSI ID #3:
No device
SCSI ID #4:
No device
SCSI ID #5:
No device
SCSI ID #6:
No device
SCSI ID #7:
AHA-3950U2B
SCSI ID #8:
No device
SCSI ID #9:
No device
SCSI ID #10:
No device
SCSI ID #11:
No device
SCSI ID #12:
No device
SCSI ID #13:
No device
SCSI ID #14:
No device
SCSI ID #15:
No device
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (*=default)
Select SCSI Disk and press <Enter>
Your computer has a disk larger than 512 MB. This version of Windows
includes improved support for large disks, resulting in more efficient use of
disk space on large drives, and allowing disks over 2 GB to be formatted as
a single drive.
IMPORTANT: If you enable large disk support and create any new drives on
this disk, you will not be able to access the new drive(s) using other operating
systems, including some versions of Windows 95 and Windows NT, as well as
earlier versions of Windows and MS-DOS. In addition, disk utilities that were
not designed explicitly for the FAT32 file system will not be able to work with
this disk. If you need to access this disk with other
operating systems or older disk utilities, do not enable large drive support.
Do you wish to enable large disk support (Y/N)...............? [N]