Select the first option Configure/View Host Adapter Settings. The next screen is shown below with the
default settings.
You can accept the default settings with Host Adapter SCSI Termination set to Automatic. If you wish to
accept the default settings, press [ESC] to return to the previous menu. Select the SCSI utilities.
IBM storage products
Page 15
IBM Hard Disk Drive Technical Support Center version 1.0
Adaptec AHA-3950U2B SCSISelect (TM) Utility v2.10.0
AHA-3950U2B at Bus: Device 00:Fh
Would you like to configure the host adapter, or run the SCSI disk utilities.
Select the option and press <Enter>. Press <F5> to switch between color
and monochrome modes.
Options
Configure/View Host Adapter Settings
SCSI Disk Utilities
Adaptec AHA-3950U2B SCSISelect (TM) Utility v2.10.0
Configuration
Host Adapter SCSI ID..................................................................................... 7
SCSI Parity Checking..................................................................................... Enabled
Host Adapter SCSI Termination...................................................................... Automatic
Boot Device Options....................................................................................... Press <Enter>
SCSI Device Configuration............................................................................. Press <Enter>
Advanced Configuration Options.....................................................................Press <Enter>
<F6> - Reset to Host Adapter Defaults
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * = default)
AHA-3950U2B at Bus:00h Device:0Dh Channel:B
Interrupt (IRQ) Channel.........................................................................................10
I/0 Port Address.....................................................................................................F400h
BIOS Information
