Type Y to select the FAT 32 file system. Type N to select the FAT 16 file system.
Next you will see the screen below allowing you to create partitions.
Note: You will only have 5 options if you have more than 1 drive. Option 5 allows you to select the drive
you wish to partition.
IBM storage products
Page 15
IBM Hard Disk Drive Technical Support Center version 1.0
Your computer has a disk larger than 512 MB. This version of Windows
includes imporved support for large disks, resulting in more efficient use of
disk space on large drives, and allowing disks over 2 GB to be formatted as
a single drive.
IMPORTANT: If you enable large disk support and create any new drives on
this disk, you will not be able to access the new drive(s) using other
operating systems, including some versions of Windows 95 and Windows
NT, as well as earlier versions of Windows and MS-DOS. In addition, disk
utilities that were not designed explicitly for the FAT32 file system will not be
able to work with this disk. If you need to access this disk with other
operating systems or older disk utilities, do not enable large drive support.
Do you wish to enable large disk support (Y/N)...............? [N]
PC DOS Version 7.0
Fixed Disk Setup Program
Copyright IBM Corporation 1983-1994
FDISK Options
Current fixed disk drive:
1
Choose one of the following:
1. Create DOS partition or Logical DOS Drive
2. Set active partition
3. Delete partition or Logical DOS Drive
4. Display partition information
5. Change current fixed disk drive
Enter choice:[1]
Press ESC to exit FDISK
