background image

Ÿ

SelectConfigure/View Host Adapter Settings.  The following screen appears.

                                   Adaptec AHA-2940 Ultra/Ultra W  SCSISelect (TM)  Utility v1.23

     Configuration

SCSI Bus Interface Definitions
   Host Adapter SCSI ID..................................................................................... 7
   SCSI Parity Checking..................................................................................... Enabled
   Host Adapter SCSI Termination...................................................................... Automatic
   
Additional Options
   Boot Device Options....................................................................................... Press <Enter>
   SCSI Device Configuration............................................................................. Press <Enter>
   Advanced Configuration Options.................................................................... Press <Enter>

                                                     

AHA-2940 Ultra/Ultra W  at Bus:Device 00:0Fh

Ÿ

Select Boot Device Options.  The screen below appears.  

  Configuration

  Boot Device 
Configuration

 Adaptec AHA-2940 Ultra/Ultra W  SCSISelect (TM)  Utility v1.23

Run SCSI Disk Utilities to get devices
in your system.

Boot Target ID...............................................................................................................................................0
                                Option Listed Below  Have NO EFFECT if Multiple Lun Support is Disabled
Boot Lun Number..........................................................................................................................................0

AHA-2940 Ultra/Ultra W at Bus:Device  00:0Fh

Ÿ

Verify or set Boot Target ID.

Ÿ

Press ESC to return to the previous screen.  

  

IBM storage products

Page 13

IBM Hard Disk Drive Technical Support Center                                                                                                                                                   version 2.0
                                                                                                                                                                                                                           34L3743IG10

Содержание Ultrastar 18LZX
























Отзывы: