IBM Types 8122, Руководство по замене

Страница: 15 / 44

Pivoting or removing the optional hard disk drive mounting bracket
The optional hard disk drive mounting bracket can easily be pivoted upward or
removed if necessary to enable replacement of some CRUs and FRUs.
To pivot the optional hard disk drive bracket upward, pull outward at the bottom
of the bracket.
Note: You might have to disconnect the cables attached to the optional hard disk
drive.
If it is necessary to remove the optional hard disk drive mounting bracket,
disconnect the cables attached to the optional hard disk drive, remove the two
screws, and lift the bracket out of the chassis.
Chapter 2. Replacing hardware
7