Chapter 3
Onboard IR Port
Use this item to determine the allocation of the
resources of the second serial port. If you select
normal, the resources are assigned to the
optional second serial port. If you select a
specific address, the resources are assigned to
the IR port, and you can use the two items
below to determine the operation of the IR port.
IR Mode
If you have an IR port installed, use this item to
determine the protocol of the port. Select
HPSIR (standard IrDA) or ASKIR.
IR Duplex
If you have selected an infrared port, use this
item to set the infrared port as Duplex or Half-
Duplex.
Onboard Parallel
Port
Use this item to enable or disable the onboard
parallel port LPT1, and to assign a port address
Parallel Port Mode
Use this item to determine the parallel port
mode. You can select Normal, ECP (Extended
Capabilities Port), EPP (Enhanced Parallel
Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign an IRQ to the parallel
port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port.
Onboard PCI IDE
Use this item to enable or disable either of the
two onboard IDE channels, Primary or
Secondary.
Pri. Master/Slave
Sec. Master/Slave
Prefetch
Use these items to enable prefetching for any of
the master or slave devices on the primary and
secondary IDE channels.
Onboard
SoundPRO
Use this item to enable or disable an onboard
sound card.
38
