IBM Turboways 155, Инструкция по установке и эксплуатации

Страница: 21 / 36

10. From the PVCs for IP over an ATM Network menu, select Change / Show
Characteristics of a PVC for IP over an ATM Network.
11. From the list of Available Interfaces, select at0.
12. If necessary, change values in the Change / Show Characteristics of a PVC for
IP over an ATM Network screen and press Enter.
13. When the Command status in the Command Status screen changes from
running
to
OK
, press F10 to exit SMITTY.
Installation Removal Procedure
To remove the ATM155 software:
1. Log on to the AIX operating system as root.
2. At the AIX command prompt, type:
smitty inet
and press Enter.
3. From the Network Interface Selection menu, select Remove a Network
Interface.
4. From the Available Network Interfaces list, select at0.
5. When the Command status in the Command Status screen changes from
running
to
OK
, press F10 to exit SMITTY.
6. At the AIX command prompt, type:
smitty atm_adpt
and press Enter.
7. From the Adapter menu, select Remove an ATM Adapter.
8. From the ATM Adapter list, select at0.
9. In the Remove an ATM Adapter panel, set KEEP definition in database to no
and press Enter.
10. When removal is complete and the Command status changes from
running
to
OK
, press F10 to exit SMITTY.
Chapter 3. Configuring and Using ATM155 Software
3-5