IBM Turboways 155, Инструкция по установке и эксплуатации

Страница: 13 / 36

Chapter 2. Installing the ATM155 Software and the
TURBOWAYS 155 PCI UTP ATM Adapter
This chapter explains how to install the TURBOWAYS 155 PCI UTP ATM Adapter
with ATM155 software as well as how to connect ATM cables. Before proceding
with these instructions, it is recommended that you read, Chapter 4, “Managing the
Network” on page 4-1.
Preparing to Install the ATM155 Software
Insure your system is running AIX 4.1.5. or later. To verify this level, type oslevel
and press Enter. If your system is running an earlier level, contact your support
representative to determine if your level is supported.
Installing the ATM155 Software
This section explains how to install the 4.1.5 or later AIX ATM common code and the
ATM155 software for the TURBOWAYS 155 PCI UTP ATM Adapter.
1. Turn the system unit power on.
2. Log in as root.
3. Insert the media containing the 4.1.5 or later AIX ATM common code device
driver software (example: CD-ROM) into the appropriate media device.
4. Type the following:
smitty devinst
and press Enter.
5. The Install Additional Device Software screen highlights the "INPUT
device/directory for software" option.
6. Select or type your input device:
Ÿ
Press F4 to display the input device list. Select the name of the device
(example: CD-ROM) that you are using and press Enter.
-- or --
Ÿ
In the Entry Field, type the
name of the input device you are using and press
Enter.
7. The Install Additional Device Software window highlights the SOFTWARE to
install option.
8. Press F4 to display the SOFTWARE to install window.
Chapter 2. Installing the ATM155
2-1