IBM TotalStorage FAStT700, Руководство по установке

Страница: 40 / 86

2. Connect an LC-LC cable to an SFP module in the FAStT700 Storage Server
mini hub. For instructions, see “Connecting an LC-LC cable to an SFP module”
on page 19.
3. Remove the two protective caps from the LC connector end of the LC-SC cable,
as shown in Figure 22. Save the protective caps for future use.
4. Carefully insert the LC connector end of the cable into the LC connector end of
the LC-SC cable adapter. Push in the connector until it clicks into place.
5. Connect the SC connector end of the LC-SC cable to one of the following
devices:
v
Optical interface connector on an IBM FAStT FC-2 Host Bus Adapter (Part
number 19K1246)
v
GBIC installed in a FAStT EXP500 expansion unit (Machine type 3560)
v
1 Gb Fibre Channel switch (Machine type 2109)
For more information about connecting to these devices, see the documentation
that comes with the device.
Removing an LC-LC cable from an LC-SC cable adapter
To remove an LC-LC cable from an LC-SC cable adapter, do the following:
Figure 22. Removing the LC-SC cable adapter protective caps
Figure 23. Connecting an LC-LC cable into the LC-SC cable adapter
24
IBM
®
TotalStorage
™
FAStT700 Fibre Channel Storage Server: Installation Guide