IBM TotalStorage 201, Руководство пользователя

Страница: 25 / 140

Families tree view and moving downward. Appliances are automatically added to
the first defined Family that matches the appliance purpose. Therefore, the order
in which Families appear is important. To adjust this search order, right-click on a
Family and then select Move Up or Move Down to adjust its position within the
Families list.
v
Orphaned Appliances
Any discovered appliances that have been configured using the IAACU but that
do not meet the rules for any existing Family are automatically added to the
Orphaned Appliances group.
v
Orphaned Externally Configured Appliances
Any discovered appliance that has been configured without using the IAACU tool
and that does not meet the rules for any existing Family is automatically added to
the Orphaned Externally Configured Appliances group. Appliances configured
without the IAACU that meet the rules for any existing Family are automatically
added to the matching Family. To add an Orphaned Externally configured
Appliance to an appropriate Family that was created after the orphaned
appliance was discovered, right-click on the orphaned appliance and select
Adopt by First Matching Family. For more information, see “Using the Adopt by
First Matching Family Function” on page 14.
Note: The IAACU will not change manually configured network settings of
discovered appliances. If the manually configured IP and Subnet
addresses fit an existing Family, the IAACU will place that appliance into
that Family, but will not change any other settings (such as Host Name,
DNS, or gateway addresses).
v
Conflicting Network Addresses
Any discovered appliance that has the same IP address as a previously
discovered appliance will be listed in the Conflicting Network Addresses group.
Creating a Family: To create a Family:
1. Select Create Family from the Family menu.
The IAACU Family Setup window displays.
2. Select the Appliance Family Rules.
The Appliance Family Rules determine what purpose an appliance must serve
to be included in the Family. You can select one of the following values:
v
IBM TotalStorage NAS Appliances
v
IBM xSeries 130 and 135
You should select IBM TotalStorage NAS Appliances for a family that is to
include your NAS 200.
3. Specify a Family name.
In the Family Name field type the name that will be used for this Family.
4. Specify network resources to be used by members of the Family.
You can use the IAACU to assign network resources for members of this
Family, or you can use a DHCP server to assign network resources.
v
To use the IAACU to assign network resources, uncheck the Use DHCP
checkbox and fill in the following fields:
Min IP Address
The lowest IP address in a range of IP addresses that can be
assigned to an appliance that is a member of this Family
Chapter 2. Configuration and administration tools
13